SBN Kit

$18.00

  • 10 pre-soldered hooks and 10 steel back hooks per kit.
  • A video explaining the method of setting up your own steel back nymphs can be found on the “product details” page.
SKU: SBNKIT Category:

Description

– 10 Tiemco 3769 (or Kamasan B175) pre-welded hooks, of the same size
– 10 steelbacks matte

Video ‘How To’ Guide

 

Here are the instructions for building your own ‘steel back nymphs’. Note that the nymphs that I sell include 2 additional steps including the welding of the crossed wires on the “back” and the sanding that follows. Another difference is the way of applying the epoxy.

Apart from the standard assembly tools, you need pointed pliers and another pair capable of cutting the stainless steel wire up to 35 hundredths. Another pair with the square end to pinch the “jaw” makes life easier but the pointed pair can do the trick.

The other essential tool is to make the half hitches. Small precision, the hole must be drilled on 15mm of length to be able to make the knots on the “mast”. A small screwdriver with a very fine blade is recommended to slide the stainless steel wire under the steelback.

10 pre-welded hooks and 10 steelback hooks per kit.

Additional information

Size

14, 16, 18